Deghat Gostar Eng. Co.

Search here

Go to content

Fixed Detectors

Sales > caegories > Gas Detection

Fixed Gas Detectors

BW GasPoint
BW GasPoint
4-20 mA Gas Transmitters
H2S, CO, Combustibles
Add to Cart
BW RRJ Series
BW RRJ Series
Zero-Maintenance Transmitters 4-20 mA
H2S or Combustibles
Add to Cart
Drager Polytron 7000
Drager Polytron 7000
The Drager Polytron 7000 is an intrinsically safe gas detector for the continuous monitoring of toxic gasses and oxygen. With its unique modular design and total flexibility: The Drager Polytron 7000 is a truly universal transmitter that can satisfy all toxic and oxygen measurement applications on a single platform. SIL 2
Approval guarantees no unrevealed failures.

Product features:
-Easy operation
-Intelligent sensors
-Communication interfaces
-Software options
-Remote SensorPump module
-Relay module
Add to Cart
Drager PIR 7000
Drager PIR 7000
The PIR 7000 is a SIL 2 approved explosion proof infrared gas detector for the continuous monitoring of flammable gases and vapours. With a 316 stainless steel enclosure and drift free heated measurement optics, it is built for the harshest industrial and offshore applications.

Product features:
-Exceptional signal stability
-Fast response mode
-Maximum reliability – SIL 2 certified!
-Multiple configuration capabilities
Performance features:
-Two versions (type 334 and type 340) with different measuring wave
-lengths for different hydrocarbons with different sensitivities
-Double-compensating and non-imaging optics (with 4-beam technology)
-Customer-specific gas library
-Configurable measuring range in %LEL, %(v/v) and ppm
-Fastest response time of less than 1 second
-Analog 4 to 20 mA and digital HART® output signal
-Beam block warning signal
Add to Cart
Drager PEX 3000
Drager PEX 3000
The Drager PEX 3000 is an explosion proof gas detector for the continuous monitoring of flammable gases and vapours in ambient air.

Product features:
-Easy to install
-One-man-calibration
-Comprehensive explosion protection
-The detection of low concentrations
-Ideal system solution
Add to Cart
Drager Flame 2300
Drager Flame 2300
The Drager Flame 2300 is an explosion-proof combined UltraViolet/InfraRed flame detector, which detects fires of substances that emit infrared and ultraviolet radiation such as hydrocarbon fuels. The Flame 2300 offers reliable and fast detection of flames with high immunity to false alarms

Product features:
-Easy to install
-Range of outputs
-Integral self-test
-Electrically isolated 4-20 mA output as standard
-Highly visible LED status indication
-Worldwide approval
Add to Cart
Drager Polytron Pulsar 2
Drager Polytron Pulsar 2
The Drager Pulsar 2 is an open path infrared gas detector. Representing the very latest advances in open pat technology – the Drager Polytron Pulsar 2 is intended for the detection of a range of gaseous hydrocarbons. This includes the alkane series from methane to hexane, propylene, ethylene, methanol and ethanol. Equipped with either a terminal box or a certified cable entry point, the detector incorporates flexible installation.

Product features:
-Easy adjustment and commissioning
-High performance
-System stability
-Heated optics
-In-built database
-HART-communication
-Extensive access to data from safe areas
Add to Cart
Drager Polytron 2 XP Ex
Drager Polytron 2 XP Ex
The Drager Polytron 2 XP Ex is an explosion proof gas detector for continuous monitoring of combustible gases and vapours in ambient air.

Product features:
-Three Possible Signal Outputs
-Ease of Use
Add to Cart
Drager Polytron 3000
Drager Polytron 3000
The Drager Polytron 3000 is an intrinsically safe gas detector for the continuous monitoring of toxic gasses and oxygen. High measuring accuracy alongside simple mounting and very easy operation. The Polytron 3000 is ideally suited to the measuring of toxic gases and oxygen in a wide range of applications.

Product features:
-Simple, quick installation
-Easy to operate and maintain
-Wide range of applications
-Explosion Protection
Add to Cart
Drager PIR 3000
Drager PIR 3000
The Drager PIR 3000 is an explosion proof infra red gas detector for the continuous monitoring of flammable gasses and vapours. With a GRP Junction box, 316 stainless steel enclosure and excellent measuring performance, the PIR 3000 offers unsurpassed price performance ratio.

Product features:
Failsafe infrared technology and low cost of ownership
Suitable for the harshest conditions
Smart and flexible
Performance features:
•Temperature-compensated and non-imaging optics
•Gas library with 3 gas categories: Methane, propane and ethylene
•Performance approval (IEC 60079) for 13 further substances
•Dirt and dust protection through hydrophobic splash guard
•Analog 4 to 20 mA output signal (universal)
•Specified temperature range from - 40 °C to + 65 °C
•Unrestricted usage in humid atmospheres
•Hermetically sealed 316 stainless steel enclosure
•Slim enclosure design for confined areas of use
•Long maintenance interval
•No moving parts
•Typical life time: 15 years
•Ex approvals for worldwide
Add to Cart
Drager Polytron IR
Drager Polytron IR
The Polytron IR is a SIL 2 approved explosion proof infrared gas detector for the continuous monitoring of flammable gasses and vapours. With a 316 stainless steel enclosure and drift free heated measurement optics, it is built for the harshest industrial and offshore applications.
Performance features
Two versions (type 334 and type 340) with different measuring wave lengths for different hydrocarbons with different sensitivities
-Double-compensating and non-imaging optics (with 4-beam process)
-A large gas library with up to 38 substances (DIN EN 50054/50057)
-Configurable measuring ranges in LEL % , Vol. -% and ppm
-Fast response behavior, supported by the "chimney effect" of the splash guard
-An analog 4 up to 20 mA signal as well as digital output signals: RS 485 and HART® (including multidrop feature)
-Beam block warning signal in the case of dirty optics as a preventive maintenance function
etc...
Add to Cart
Drager Polytron TX
Drager Polytron TX
The Dager Polytron TX is an explosion proof gas detector for continuous monitoring of toxic gases and oxygen in ambient air. Non-intrusive calibration and maintenance means no special area permits are required to perform routine tasks.

Product features:
-Easy to install
-One man calibration
-DragerSensor technology
Add to Cart
Drager Polytron FX
Drager Polytron FX
The Drager Polytron FX is an explosion proof, gas detector for the continuous monitoring of combustible gases and vapours in ambient air. Non-intrusive calibration and maintenance means no special area permits are required to perform routine tasks.

Product features
-Easy to install
-High sensitivity DragerSensor PR
-One-Man-Calibration
Add to Cart
Drager Polytron IR CO2
Drager Polytron IR CO2
Drager Polytron IR CO2 is a fixed gas detector for continuous monitoring of carbon dioxide. It offers all the benefits of fail-safe Infra red measurement technology, and its materials of construction make it suitable for harsh applications.

Product features:
-Display and mounting options
-Comprehensive explosion protection
-Preventive maintenance
-Robust construction
Add to Cart
Drager PIR 7200
Drager PIR 7200
The Drager PIR 7200 is an explosion proof infra red gas detector for the continuous monitoring of carbon dioxide (CO2) Reliable in the harshest environments – the infrared-optical transmitter Drager PIR 7200 offers drift-free optics for accurate CO2 detection.

Performance features
-Double-compensating and non-imaging optics (with 4-beam technology)
-Linearised response characteristics for carbon dioxide
-Configurable measuring range in %(v/v) and ppm
-Analog 4 to 20 mA and digital HART® output signal (including HART multidrop mode)
-Beam block warning signal in the case of contaminated optics for predictive maintenance
-Multiple configuration capabilities of all special signals
-Specified minimum supply voltage of 13 V DC
-Extended temperature range from - 40 °C to + 77 °C
-Unrestricted usage in humid atmospheres
-Hermetically sealed stainless steel 316L enclosure
-Long maintenance interval thanks to minimum long-term drift
-Typical life time: greater than 15 years
-Ex approvals
etc...
Add to Cart
Drager Polytron SE Ex
Drager Polytron SE Ex
The Drager Polytron SE Ex ... DD sensing heads are gas detectors for the continuous monitoring of flammable gases and vapors in the ambient air. The measurement is based on the heat of reaction principle, where a chemical reaction takes place in a catalytic bead (so-called pellistor) inside the sensor.

Product benefits:
-Large temperature range
-Eight housing variants
-Comprehensive explosion protection
-Measuring signal
-Pellistors sensors Type DD
-Environmental conditions
-Poison resistance
Add to Cart
Drager Polytron 2 XP Tox
Drager Polytron 2 XP Tox
The Drager Polytron 2 XP Tox is an explosion proof gas detector for continuous monitoring of toxic gases and oxygen in ambient air. The transmitter converts the signal from an electrochemical sensor to 4 to 20 mA analog, HART® or RS 485 digital signal output. The unit is designed for one-man calibration, and offers a variety of diagnostics and self test features.

Product features:
-Easy to install
-One man calibration
-DraegerSensor technology
-Stand alone system
Add to Cart
 
RAE Guard PID
Fixed Gas Detection

The RAEGuard PID is a permanently mounted (fixed) volatile organic compound (VOC) monitor using a Photoionization Detector (PID) transmitter that operates from a 9 to 36 VDC power source and provides an analog (4-20 mA) signal output in three full scale ranges* of 20 ppm, 100 ppm, or 1,000 ppm isobutylene equivalent. Housed in an explosion-proof enclosure, the RAEGuard PID is equipped with a local digital display of the gas concentration and functional keys for performing calibration.
Add to Cart
 
RAE Guard EC
Fixed Gas Detectors

The RAEGuard EC is a permanently mounted (fixed) toxic gas or oxygen sensor/transmitter that operates from a 9 to 36 VDC power source and provides an analog (4 to 20mA) and digital (RS-485)signal output. Housed in an explosion-proof enclosure, the RAEGuard EC is equipped with a local digital display of the gas concentration and function keys for performing calibration. The RAEGuard EC is operated with a standard 4 to 20mA/RS-485 controller or as a stand-alone sensor module.
Add to Cart

Control Units

BW CR-4000
BW CR-4000
Four-Channel Controller
4-20 mA AC/DC
Add to Cart
Drager REGARD control system
Drager REGARD control system
Tried and tested thousands of times and infinitely flexible. The modular Regard control system can be individually adapted to any monitoring task. Suitable for SIL 2 systems, the Regard system is also ATEX approved, and meets EMC directive standards.

Product features:
-Simple configuration
-Established system
-Flexibility
Add to Cart

Sub-Menu:


Back to content | Back to main menu